Particulate separator for wood heating systems up to 3 MW – OekoRona M
The particulate separator OekoRona M is an electrostatic precipitator which considerably reduces the emission of micro-dust caused by wood and coal boilers with outputs between 200 kW and 3 MW.
OekoRona M – Particulate separator for wood heating systems up to 3 MW
The modular design allows installations on both new and existing systems and makes OekoRona M a very flexible, highly efficient industrial dust collecting system. The mechanical cleaning mechanism enables a fully automatic operation of the particulate filter and reduces maintenance to a minimum.
Facts
- For all pellet and wood chip boilers
- Fully automatic mechanical and very quiet cleaning system
- High efficiency of PM removal
- Very low operating costs
- Retro-fit possible
- Reliable in negative or excessive pressure
- Fully integrated bypass system
- Very low energy consumption
- Various installation heights available
- Flexible ash removal
- Max. raw flue gas temperature of 250°C
Operating Principle
The particles contained in the raw flue gas are charged by high-voltage electrodes and adhere to the inner wall of the separator tubes.
Installation
The OekoRona M is preferably mounted directly after the boiler system in the boiler room. Due to the modular design, it is possible to install the filter in individual segments in spacially constrained installations.
Operation and Maintenance
The operating parameters of the electrostatic precipitator OekoRona M can be set through a touch display. A sliding device mechanically scrapes off the separated particulate matter from the internal tubes which fall into a sump at the bottom of the filter box. An automatic auger transports the separated particles into an external receptacle which must be emptied regularly by the operator.
The electrostatic precipitator OekoRona M is equipped with electrical or hydraulic heating to prevent condensation.
Remote maintenance: Adjustments can be made and operating errors can be remotely monitored and remedied. This increases the filter availability and reduces maintenance costs.
Schmelziweg 2
8889 Mels-Plons
Switzerland
Tel.:+41 (0)81 511 63 00
info(at)oekosolve.ch